قالب وردپرس قالب وردپرس قالب فروشگاهی وردپرس وردپرس آموزش وردپرس

Light Master one



 
 

 

Light Master one

The bodies, lightweight and compact, are manufactured in die cast aluminum, with primary alloy and low copper content with a high tight rating. The enhanced construction design reduces the weight and allows easy handling during mounting and aiming phases. The design, with the characteristic cooling fins, reduces wind resistance to a minimum. The LIGHTMASTER ONE floodlights have been designed to light up: medium and large stadiums with HD cameras sports halls large indoor sports areas events and shows in large open areas. The projectors are suitable for installation on masts and line arrangements at heights up to 50/70 meters above and around the surface area.
  • Body, rear cover and glass frame in die cast aluminum with primary alloy and low copper content, with an high weather proof rating

  • Coated with silver polyester powder

  • Front tempered glass resistant to high temperatures and to thermal shock

  • Anti-ageing gaskets in silicon rubber

  • Hot deep galvanized sheet steel fixing bracket

  • Connection box in special self-extinguish plastic material, complete with igniter

  • Two pressure compensation filters in Teflon

  • Insulation class I and II

  • Protection degree against external impacts: IK 08

  • Floodlight body weight Kg 13,50

  • Wind exposed surface with tilt 70° = 0,20 m2

  • Control gear box CABLO SERVICE, in die-cast aluminum IP 65 for class I or in thermoplastic material IP 66 for class II, may be used for the supply of the lamp

  • The projector can be equipped with the innovative and efficient metal halide lamp 2000W high flow (230000 lm), requiring the versions especially designed for this lamp. Even the power supplies unit must be requested in special version

  • The mounting distances between the gear box and the body can be up to 50/70 meters, as the igniter is fitted within the rear housing of the projector

  • Designed for indoor and outdoor applications

  • The fixture is approved for nominal temperature of 35°C. Thus, according to EN 60598-1, the fixture can be used, for discontinuous periods, at 45°C

  • Hot Restrike version for short arc lamp available on request (for 1000W Hot Restrike please specify if it’s used for up or down lightings). In these versions, to allow the maintenance of the distances for high voltage, the lighting performances are 5% lower compared to the standard version


  • Dimensions (LxHxP) 625 x 535 x 315 mm
    Floodlight weight 13.5 kg
    Surface wind resistance lateral with tilt 70° 0.2 m2